For information about technical specifications click here.

Innovation, creativity and quality are the three basic keys of ALFA FLOORING, ALFA WOOD that becomes unique manufactured product for the Greek area and for the Balkan area.
Alfa WOOD offering high quality products innovates for one more time. The new state-of –the-art production line located in Grevena produces ALFA FLOORING - Laminate floors, a kind of product that up until now was strictly imported. After researches and quality controls the company guarantees that the new flooring is exceptionally resistant and environmental friendly, while at the same time are characterized by comfort, warmth and minimum maintenance.
ALFA WOOD offers new colors from different varieties of wood like (beech, oak, maple, walnut, teak, wenge, cherry etc) in relief surface.

Elegant line

COUNTRY OAK	MERINOS OAK	COUNTRY OAK PYRENEES	CLASSIC OAK ALLOWER	MONTANA OAK ALLOWER	WENGE
VINTAGE OAK	OAK SUNSET	PLATEAU OAK

Classic line

FAGGIO MARLENE	FRASSINO OTTO	VERNEA TEAK ALLOWER	SANGONE WALNUT	EDEN CHERRY
KENTUCKY OAK	AUTHENTIC OAK



Συνεργασία με την εταιρεία Unilin, παγκόσμια Leader στην εφεύρεση και ανάπτυξη της πατέντας clic.

Το σύστημα clic, είναι μια από τις καλύτερες μεθόδους σύνδεσης στην αγορά, εγγυάται ένα δάπεδο χωρίς ραφές και με αρμούς που είναι πρακτικά αόρατοι. Έτσι το δάπεδο καθαρίζεται πιο εύκολα.
Η οριζόντια επιφάνεια στο επάνω μέρος του γλωσσιδίου κουμπώνει τέλεια στην εσοχή και έτσι δεν υπάρχει διάκενο μεταξύ των σανίδων. Το δάπεδο είναι επίπεδο, χωρίς διαφορές ύψους ή φθορές στα σημεία  ένωσης.

TECHNICAL PRESCRIPTIONS
ALFA WOOD offers you 12 new colors from 12 different varieties of wood like beech, oak, maple, walnut, teak, wenge, cherry etc, in relief surface and in dimension 1213 mm x 196 mm. The thickness of the flooring is 7mm. The number of pieces per package is 9 pieces weighting 13,180 kg (+_ 5%). Two kinds of floors are produced, one of which will have embedded underlay. This is a new underlay which will be embedded to the flooring and will have 3 mm thickness. The number of pieces per package with underlay will be 6 pieces weighting 8,850 kg (+_ 5%).
The ALFA FLOORING is recommended for heavy domestic use, such as bedrooms, living rooms, kitchens etc. Also, its unique quality makes it suitable for middle professional use, such as hotel rooms, gyms, offices etc.

WARRANTY
ALFA WOOD offers you 10 years warranty for damages. Strict tests and quality controls guaranty the quality of the flooring.

ACCESSORIES THAT COMPLEMENT THE UNIQUENESS

Since you have selected an excellent Laminate Floor and you desire to maximize the comfort offered to you by ALFA FLOORING, ALFA WOOD has created a range of accessories. The ALFA WOOD underlay makes sure that your Flooring will be attractive and of good taste while the ALFA WOOD skirting in the exact same color will give an absolute perfect matching finish in your place.

COATING MATERIALS
1. Surface interfacing with high tenacity – endurance film (overlay AC3)
2. Impregnated decorative paper with melamine resins (decorative paper)
3. High density Fiberboard (HDF), water resistant for low swelling, E1 category, density 900 kg / m3
4. Balancing foil, impervious to humidity
5. Integral underlay (optional).

FITTING

IMPORTANT RULES
1. Prior to and during laying, each floor-panel should be checked for mechanical damage and color differences. Should be panels with defects be laid, the rights of warranty will be denied. The panels with defect found prior to fixing are subject to replacement with defect-free panels at your dealer.
2. In order to obtain the best visual effect, the floor-panels should be fixed in the direction of the main light source.
3. The laminated floorings form so called floating floor and therefore they must not be glued, nailed or otherwise fixed to the sub-floor.
4. Expansion gaps of 8-10 mm should be maintained between the floor and stationary perpendicular elements (pillars, door thresholds, pipes, walls, etc.) to allow for expansion or contraction due to chances in temperature and humidity. Spacing wedges should be used to keep the required gaps.
5.When the room length is over 8m or its width exceeds 6m, expansion gaps of 2-3 cm in width should be made (in proportional sections of the floor).

TOOLS AND MATERIALS
– a carpenter’s hammer, a mallet, a push -block, a spoon – lever, spacing wedges, a saw with fine teeth, a vapour-impermeable PE/PA film with a thickness of 0.2mm, ALFA WOOD backing mat with a thickness of 3 mm, baseboards, a pencil, a straight-edge, a measuring rule..

PREPARATION PROCEDURE
1. Prior to fixing, the laminate floorings should be stored for at least 48 hours in the room to be laid. Recommended conditions: temperature 18-220 C, relative humidity up to 70%.
2. The laminated floor – panels may be fixed only on flat, dry, clean and stable surfaces. Minor surface irregularities can be leveled with the ALFA WOOD backing
mat. Sub-floor irregularities higher than 3mm should be ground off or evened out.
3. The laminated floorings may be laid on various sub-floors. Particularly suitable are the following :ALFA WOOD OSB (tongue and groove joint), wooden floors ( the floor panels should be laid perpendicularly to the floor board axis), ceramics, linoleum, carpets with short piles, needled non-woven, PVC floor – coverings , concrete-jointless floor.
4. The previously evened out subfloor should be covered with a vapour –impermeable film (lap joint fixed with a moisture – resistant adhesive tape) and then with the ALFA WOOD backing
mat (butt joint).

INSTALLATION
1. The ALFA Flooring requires no glue! The first row of panels should be laid with the tongue towards wall, bearing in mind the expansion gap. Match panels very carefully. First click the longer edges positioning the panel at 20-30 ο angle and lowering the level. (See figure 2.4). Next match the shorter edges carefully with the hammer and push-block (see figure 1). 2. The panels in successive rows should be shifted to each other by minimum 40cm (staggered arrangement). The cut off portion of the last panel in the row becomes the first element of the next row. Thus, an optimal arrangement of floor-panels is obtained in strength and visual terms. ( see figure 3.6). 3. In order to properly join the last panel in the row, a pull-iron should always be used. 4. Laying the last row. Calculate the exact width of the last row of panels. To do this, lay a panel on the penultimate row of panels. Then lay a second panel with the groove to the wall on the panel to be measured and use it as a ruler. And please do not forget the wall clearance. Saw the panels to size according to the makings and slot in as described (see figure 7). 5. Once the last row of panels is laid, the new floor may be walked on immediately. Of course, the spacers should be removed and the gaps covered with the baseboards, fixing them only to walls with clamps.

FINAL REMARKS
1. The floor in use should be protected against sand and other abrasive materials-felt pads should be fitted to the feet of furniture. 2. Dirt and impurities can be easily removed wit a damp cloth rinsed in water. The laminated floor must not be wiped with wet cloth or sprinkled with water! Failure to observe the instructions given in the present manual can bring about damage to the floor and consequently loss of warranty..

*Every ALFA FLOORING code is available with imbedded underlay upon request.

.